6440A REV A Norge Washer Parts List

Search the entire 6440A REV A by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Pantry end cap kit, lh and rh (end cap, lh pantry)

The pantry end cap attaches to the inside of the refrigerator cabinet to support the pantry drawer. This is a kit and it includes the left and right end cap. The part is made of plastic, is white in color and measures 24” long. This is a genuine OEM part.

Easy Part #:: EAP11738134

Availability:: In Stock

Price:: $50.76

Refrigerator door shelf bin (refrigerator door bin)

The door bin attaches to the inside of your refrigerator door to hold bottles or jars and can be moved according to space needed. If the door bin is cracked or the mounting tabs have broken off, you will need to replace the bin. The bin is clear with white trim around the top edge. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11752778

Availability:: In Stock

Price:: $44.31

Light bulb - 40w (sub 0053437)

This part is the exterior replacement light bulb, with a small screw base, for your microwave. If your light bulb is burnt out, it will not be able to do this, and will need to be replaced. Before you change the bulb, be sure to check that the light socket still works, as it may need to be replaced as well. This bulb is 40 watts, is sold individually and is a genuine OEM part. Remember to disconnect the microwave from the power source before you begin this repair.

Easy Part #:: EAP2376034

Availability:: In Stock

Price:: $10.19

Door strike (striker)

This is a door strike for your washing machine. It is the piece that activates the door switch once the door is closed. If your washer will not start, will not fill with water, or the door will not open/close you may need to replace the door strike. This part is white in color, made from plastic, and measures approximately 2 1/2 inches. This is a genuine OEM part.

Easy Part #:: EAP890617

Availability:: In Stock

Price:: $17.64

Dishwasher chopper assembly

This part chops up/mince the food particles to prevent from clogging the dishwasher pump. This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing draining problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.

Easy Part #:: EAP11722146

Availability:: In Stock

Price:: $39.94

Dryer drum support roller (Whirlpool dryer drum roller)

The drum support roller has a metallic bearing in its center. This part is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, won’t tumble or takes too long to dry, you might need to replace the roller. It is recommended that you replace both rollers at once. This is a genuine OEM part and is sold individually. Please remember to shut off the power to the dryer before starting the repair.

Easy Part #:: EAP11752609

Availability:: In Stock

Price:: $26.06

Charcoal filter (filter)

The charcoal filter is used to eliminate odors while cooking from that air that circulates through the vent. The filter measures approximately 5” by 5” and is sold individually. This is a genuine OEM part.

Easy Part #:: EAP1871363

Availability:: In Stock

Price:: $13.24

Chrome drip bowl - 8 inch (sub 74001213)

This eight-inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11750107

Availability:: In Stock

Price:: $8.81

Flat style oven igniter kit (sub 12400035)

The flat style gas oven igniter is used to ignite the gas to light the oven burner, which produces heat for your range. If the element has shorted out, is no longer glowing, or is glowing but only orange or red rather than white, then you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. The igniter measures approximately 3-3/4"in length and the amperage range is 3.3 to 3.6. This igniter kit can replace igniters for either the broil or bake burners and can replace shorter and longer igniters. The kit includes the igniter, 4 wire nuts, insulation, 2 wire assembly and a bracket. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Easy Part #:: EAP1573892

Availability:: In Stock

Price:: $66.38

Lower rack wheel kit - 8 pack (roller lower rack)

The lower rack wheel kit includes 8 wheels and 8 axels for your rack. If your dishrack is not moving in and out of the dishwasher properly you may have a broken or missing wheel and it will need to be replaced. The wheel and axle are white in color and made of plastic. This is a genuine OEM part kit.

Easy Part #:: EAP11726733

Availability:: Special Order

Price:: $46.02

Refrigerator crisper frame (frame, crisper)

Glass and centre support is NOT included. Must be ordered separately. This frame along with the glass provides the crisper drawer for fresh storage of vegetables

Easy Part #:: EAP11756423

Availability:: In Stock

Price:: $120.52

Shock absorber kit (shock absorber)

The shock absorber kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin, and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during its cycles. If one or both of them break or wear out it will cause the washer to vibrate or shake and will need to be replaced. This kit is a genuine OEM part. Please remember to disconnect the power to your appliance before starting the repair.

Easy Part #:: EAP3508101

Availability:: In Stock

Price:: $45.56

Rear drum bearing kit (shaft)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP459829

Availability:: In Stock

Price:: $59.23

Drip bowl - 6 inch (sub 308648k)

This six-inch chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl measures approximately 7 2/3” in diameter. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11750108

Availability:: In Stock

Price:: $7.99

Door catch kit (use wpl 279570)

This door catch kit contains two door strikes and three door catches to service dryer doors that have one or two catches. Make sure to read the instructions to determine which one to use for your model. These parts keep the dryer door closed to allow the dryer to operate. If your door won't stay closed or will not start you may need to replace this part. This is a genuine OEM part.